May Meeting Notice

 

May 2003 Meeting Notice


 Subject:Objective Audio Quality Analysis Using the PEAQ ITU Standard
 Speakers: Aart Konynenberg, Eric Benjamin
 Place: Dolby Labs, San Francisco
 Time and Date: May 29th, 7:30 PM (refreshments at 7:00 PM)

The technology behind an ITU standard called PEAQ, or Perceptual Evaluation of Audio Quality will be presented. Opticom's founders, formerly of Fraunhofer Institute, have much experience perfecting the psycho-acoustic models of MPEG audio, which is fundamental in the objective perceptual testing methods that are largely replacing subjective listening tests. Their work has resulted in speech and audio testing standards which include PEAQ, and many companies including Dolby Laboratories have
gained experience using PEAQ in performing objective evaluation of audio quality. Mr. Benjamin of Dolby Laboratories will describe the experience Dolby has gained in using PEAQ. Also, Opticom will present a demonstration of testing with PEAQ technology.  Opticom received the AES Publication Award 2003 for PEAQ technology at the recent 114th AES Convention in Amsterdam. Preprints of this paper will be available at this AES Section Meeting.

Aart Konynenberg is Vice President of Business Development with Opticom Instruments Inc. Aart assists companies with their technology roadmaps, product verification and network design reviews. He also teaches, writes papers, and presents at many conferences. Before joining Opticom, Aart work for a number of T&M companies as Product Manager, Marketing Manager and Director responsible for a wide selection of Telecommunication and IP test equipment. He has represented Tektronix on numerous standards committees, including ANSI, IEEE and ITU. He holds several patents for measurement technologies in Telecommunications networks. Aart has had a long-standing interest in test as well as reliability, availability, and serviceability dating back to his time in the Airforce where he managed Radio Relay Communication networks.

Eric Benjamin has been an employee of Dolby Laboratories for 13 years, first in Product Engineering, then in the Consumer Division, and most recently in the Research Division.  He has been a Papers Chairperson of five AES Conventions and Conferences and is an active researcher in the areas of audio reproduction and quality.

Directions

http://www.dolby.com/company/directions_sf.html

From Peninsula/S.F. Airport/Silicon Valley (Hwy. 101 North) Take Vermont Street Exit. Make immediate left onto Vermont Street. Go 5 blocks and turn left onto Alameda Street. Three blocks up is Potrero Avenue. Dolby is the large, red, 3-story brick building on the corner of Potrero and Alameda.

From Bay Bridge (Hwy. 80 West) Take 9th Street/Civic Center exit. Go to the south onto Harrison Street. Follow Harrison to 10th Street. Turn left onto 10th Street and proceed under freeway overpass onto Potrero Avenue. Dolby is the large, red, 3-story brick building on the corner of Potrero and Alameda.

From Golden Gate Bridge (Hwy. 101 South) Cross Golden Gate Bridge, take the Lombard Street (Hwy. 101) Exit. Follow Hwy. 101 signs up Lombard to Van Ness Avenue. Turn right. Proceed on Van Ness to Fell Street and turn left. Proceed on Fell until it crosses Market Street and becomes 10th Street. Continue on 10th under freeway overpass and bear right onto Potrero Avenue. Dolby is the large, red, 3-story brick building on the corner of Potrero and Alameda.

Address:
Dolby Laboratories
100 Potrero Avenue
San Francisco, CA 94103-4813
415-558-0200